Mobile silo vibration sieve

Mobile silo vibration sieve

Mobile vibration sieve is known as vibration sieve silo machine, mounted at the bottom of the universal wheel, it can rotate 360 degrees to move, Mainly used in screening venues environment are not fixed , making it easy for users to move and meet different sites work needs. By adjusting the bunker in the butterfly valve to control the flow of the material into the vibrating screen, then come into screening operations. Features of this product is intermittent feeding. Workers do not have continuous feed, save labor, size of the flow control valve can improve screening accuracy.

Mechanical installation and adjustment

1. There should be a stabilized base for equipment. When the equipment is installed on the ground or cement, it need not install bottom screw. When the equipment install on steel structure frame, screws should be fixed on the steel structure frame, and the steel structure should have a certain thickness.
2.Before the equipment is shipped from factory, it has installed screen,customers can change screen by yourselives during the using.
3. Before starting, customers should first check degree of fastening bolt and whether mouth position connect with stock receiver. Observe whether vibration motor can move and check whether each layer sieve  is fastened.
4. Before the vibration sieve  access electrical control panel, firstly, check the electrical control panel. After line connected, observe whether vibration motor rotation direction is clockwise. Wether pperation is normal and there is no noise.
5. Adjusting vibrating motor  phase angle to fit all kinds of material screening.

Selection and parameters: